Error 18: Unable to Clear Outfeed
Variable M576
The saw believes there is an offcut on the leading end of the timber that it has not been able to clear from the outfeed. The feeder sensor closest to the saw chamber on the outfeed side is still blocked.
What to do now
Clear timber from outfeed and press START to continue, or stop the saw by holding down the STOP button.
What to do next
- Check that the "eye" feeder indicator in the monitoring panel is grey (to confirm that the indicated sensor is blocked).
- Try to clear the blockage with either air or a stick before continuing.
- If necessary, stop the saw and open the door to remove the blockage before restarting.